For many homes with a modern condensing combi boiler, yes. The flow temperature is how hot the boiler makes the water going to your radiators, and lots of boilers are left set higher than they need to be. Turning it down a little lets the boiler condense more of the time, which is when it uses gas most efficiently. The house may take a bit longer to warm up, but it should still get comfortable. If you’d like it checked or set up properly, our boiler service and repairs team can help homes in Wimbledon and Sutton.
What flow temperature actually means
Your boiler heats water and pumps it round the radiators. The flow temperature is the temperature of that water as it leaves the boiler. It isn’t the same as the room temperature on your thermostat.
Many boilers have a dial or a menu setting with a radiator symbol. That’s the one that controls the heating flow temperature. There’s usually a separate setting with a tap symbol for hot water.
Why a lower flow temperature can save gas
Modern condensing boilers are designed to recover extra heat from their exhaust gases. They can only do that well when the water coming back from the radiators is cool enough. If the flow temperature is set very high, the return water stays hot and the boiler rarely condenses.
Turning the flow down means the boiler runs cooler and condenses more often. It’s a small change that costs nothing to try.
How to try it safely
On a combi boiler, adjusting the heating dial is a normal user control and is safe to do yourself:
- Find the heating (radiator) setting on the boiler, not the hot water one
- Note where it’s set now, so you can go back if needed
- Turn it down a step at a time rather than all at once
- Leave it for a few days and see how the house feels
- If rooms don’t get warm enough on cold days, nudge it back up a little
Don’t take the casing off or change anything in an engineer menu. If your boiler uses a code or a menu you’re not sure about, check the user manual or ask an engineer to set it during a visit. A regular boiler service is a good opportunity to have the settings checked.
When to leave it alone or get advice
Lowering the flow temperature isn’t right for every home.
Homes with a hot water cylinder
On system and regular boilers that heat a cylinder, the stored hot water needs to stay hot enough to control bacteria. Don’t lower the cylinder or hot water temperature without advice. Our guide to combi, system and regular boilers explains which type you’re likely to have.
Small radiators or poorly insulated rooms
If some rooms already struggle to get warm, a lower flow temperature may leave them cold on frosty days. Bigger radiators or better insulation might be needed first.
Older non-condensing boilers
If your boiler is old enough not to be a condensing model, the efficiency gain from turning it down is much smaller.
Getting comfortable at a lower temperature
A few habits help the house feel warm with cooler radiators:
- Let the heating come on a little earlier, as it may take longer to warm up
- Bleed radiators that are cold at the top so they heat fully
- Keep furniture and long curtains away from radiators
- Use thermostatic radiator valves to keep spare rooms cooler
Boiler settings in Epsom, Wimbledon and around Sutton
Many homes around Epsom, Sutton and Wimbledon have combi boilers fitted in kitchens or airing cupboards, often still on the settings they were installed with years ago. Victorian and Edwardian houses with large rooms and older single radiators may need a little more flow temperature than a modern flat, so it’s worth adjusting gradually and seeing how each room copes.
Frequently asked questions
What flow temperature should I set my combi boiler to?
There’s no single right number for every home. Many households try somewhere around 60°C for the heating and find the house still gets warm, but it depends on your radiators, insulation and the weather. Start a little lower than your current setting, give it a few days and adjust from there.
Will a lower flow temperature damage my boiler?
No. Modern condensing boilers are designed to run at lower temperatures, and that’s when they work most efficiently. If the boiler is set within its normal user range, adjusting the heating dial won’t harm it. If you’re unsure which setting to change, ask an engineer to show you during a service.
Does turning down the flow temperature affect my hot water?
On a combi boiler, the heating and hot water usually have separate settings, so changing the radiator setting won’t affect your taps. On a system or regular boiler with a cylinder, the settings can be linked, so get advice before changing anything that controls the stored hot water temperature.
Want your boiler set up properly?
If you’d like help finding the right settings for your boiler and radiators, get in touch and we’ll check your system and set it up to run efficiently this winter.